Click on image to zoom
  • 3G-SDI Interface Board Kit for Sony FCB-EH and FCB-EV Series of HD Block Cameras
  • 3G-SDI Interface Board Kit for Sony FCB-EH and FCB-EV Series of HD Block Cameras
XBlock Interface Board Kits

iShot® XBlock® 3G-SDI Interface Board Kit for Sony EV & EH Series, and Sentech STC-AF243 HD Block Cameras

EM18624

Overview

  • 3GSDI output for Sony EV & EH Series, and Sentech STC-AF243
  • BNC to MCX cable
  • Depending on camera model, component and SD composite analog video outputs available
  • Camera video standard is coded with switches and a serial link (RS232 or TTL level) allows control of camera and audio setting.
  • RS232 to/from TTL conversion for external control
  • LVDS decoding to 16 bit parallel BT656 video bus (FPGA)
  • Video and audio multiplexing, serialization and SDI signal generation (SDI serializer)
  • 6 to 12V DC camera power supply and 1.2V and 3.3V voltage generation 
 

Log in or Register to View Pricing
Description
Specifications
Items Included
Accessories
Downloads

The 3GSDI interface board provides connectivity to the Sony EV & EH series, and Sentech STC-AF243 Block Cameras. The board converts SVDS to 3GSDI and allows for communication vis RS232 or TTL (3.3u) to control camera function. 6 to 12V DC camera power supply.

3GSDI output for FCB EV Sony block cameras, FCB-EV7500 and FCB-EV7100

3GSDI output for SENTECH STC-AF243

FEATURES:

  • SMPTE-424M 3G HDSDI Digital Interface
  • BNC to MCX cable
  • Automatic SONY camera recognition
  • Analog HD and SD video output.
  • Enhanced HDSDI signal quality : LOW jitter
  • Video format selection by micro switch.
  • Embedded Color bar & pathologic charts &
  • Embedded cross reticule
  • TTL or RS232 VISCA dialog level.
  • 6 to 12 VDC protected and EMC filtered power supply for interface and camera

 


 

1.2 Technical Characteristics

1.2.1 LVDS Video Input
  • 4 pairs data LVDS signals and 1 pair clock signal (74,25MHz)
  • Y Cb/Cr 8 bit coding + HVF synchros
  • Video formats : 1080p59,97/50, 1080P29.94/25, 1080i50/60, 720p 50/60, 1080p25/30, 720p25/30 according to camera model
  • KEL USL30 pin connector
 
1.2.2 Analog audio inputs ( option)
  • Two audio channels : Line or microphone level (RS control)
  • Line input (47k ohm impedance) :
    • 0 dBu analog input level for -18dBFS SDI level
    • gain setting from -97dB to + 30dB
  • Microphone input :
    • DC bias voltage up to 2.3V for electret microphones
    • maximal gain :+63dB
  • Fonctions (RS control) : Constant recording volume - Automatic level control (ALC), 2 channels mixing
  • 24bit, 48kHz analog to digital conversion
  • Frequency response : 20Hz – 20kHz +/- x.xdB
  • Noise: -xxxdB
  • Molex 1.25mm 5 pin connector
 
1.2.3 HDSDI video output
  • 8 bit SDI signal 800mV pp, 75 ohm impedance compliant to SMPTE 424M and 292M
  • Same video format as camera
  • Rate : HD = 2.970 Gb/s & 1.485Gb/s.
  • Option 2 audio channels embedded on group 1 (SDI)
  • BNC, SMB or MCX 75 ohm connector
1.2.4 Analog video output
  • YPbPr and CVBS according to camera
  • Molex 1.25mm 10 pin connector
1.2.5 Serial control
  • TTL (3V3) or RS232 level
  • Molex 1.25mm 10 pin connector
1.2.6 Miscellaneous
  • 6 to 12V DC power supply, about 5W consumption with camera
  • Board dimensions : 45mm x 48mm, 3 mounting holes diam. 2.5mm

Functions 

Specifications 

DIGITAL video output 

3G HDSDI SMPTE 424 M, HDSDI 292 M 

Analog video output 

Y, Pb , Pr 75 ohms, 1V . 

Video output standard configuration 

Micro switches 

Camera setting 

RS232 , RX , TX , VISCA 

Connector 

BNC , (SMB, MCX.: OPTIONS) 

Power 

6 to 12 VDC, 6 W ( including camera) 5V for SE 600 

Environmental 

0°C to 60°C 

Storage 

-20°C to 60°C 

Regulation 

EMC FCC part 15, PCB : UL 

 

3GSDI/HDSDI Interface board Kit includes interface board, BNC to MCX cable, right angle black anodized aluminum plate, 10 Pin Harness 8.25 inches, 2 Pin Harness 8.25 inches, Ribbon Cable 6.075 inches, 30 Pin Kel Cable 5 inches, 10 screws, and 3 standoffs.

Camera Control Units

iShot® XBlock® Desktop Camera Controller for Sony FCB-EV, EH, SE, EX-E and EX-F Cameras

EM18821

The iShot® XBlock® Desktop Camera Controller is designed to supply all that is needed to operate basic camera functions (i.e. zoom, iris, gain, freeze, etc.) for our XBC-KZ10 and any Sony FCB-ER Series, FCB-EV Series, Sony FCB-EH, FCB-EX F Series or FCB-EX E Series Color Block Camera integrated with an XBlock housing. Click Here for specific camera compatibility details.

iShot® XBlock® Handheld Camera Controller for Sony FCB-EV, EH, SE, EX-E and EX-F Cameras

EM18819

The iShot® XBlock® Hand Held Camera Controller is designed to supply all that is needed to operate every camera function (i.e. zoom, iris, gain, freeze, etc.) for our XBC-KZ10 and any Sony FCB-EV Series, Sony FCB-EH, FCB-EX F Series or FCB-EX E Series, Color Block Camera integrated with an XBlock housing. Click Here for specific camera compatibility details.

Digital Cables

D-Sub (RS-232) 9 Pin to 9 Pin 6 foot Cable

EM62645

The 6 ft. D-Sub (RS-232) cable can be used to connect a PC or camera to a TV, a monitor or a projector.

D-Sub (RS-232) 9 Pin to 9 Pin 10 foot Cable

EM62646

The 10 ft. D-Sub (RS-232) cable can be used to connect a PC or camera to a TV, a monitor or a projector.

iShot® Accessories

iShot® XBlock® HD Power and Communication OEM Harness Kit

EM68115

The harness kit provides power and communication with the HDMI and 3GSDI boards for the Sony FCB-EV and EH series of HD block cameras.

Power Supplies

iShot® XBlock® 2.1mm Coax Switching Power Supply, 12VDC 100 - 240 Input

EM66057

Switching Power Supply is equipped with a 2.1mm coax power plug, 12 Volt DC, 1 AMP, Fully Regulated, Ultra lightweight and 100-240 Input. Recommended for use with the iShot Xblock handheld controllers and our terminated interface board kits.

  • Adobe PDF

    iShot® XBlock® 3G-SDI Interface Board for Sony HD Block Cameras Spec Sheet

    (903.1 KB)

    Download